I have been asked to restrict the payroll staff so they cannot edit their own master records using PA30, but leaving them with the ability to edit all other staff. Any suggestions on how to make this happen would be greatly appreciated because I have searched for the answer, played with P_Origin, P_Orgxx, and P_Pernr with no luck, or is this even possible?
Thanks in advance,
Jenn
Hi all
Calling all SAPUI5 experts out there. We are in the process of setting up HR Renewal and have a peculiar situation with the lanes after personalisation. I hope that you have seen something similar and you know of a magic switch which will get rid of this little niggle we are experiencing.
Here is a rundown of what we are experiencing with some screenshots attached.
When starting up the Employee Self-Service and Manager Self-Service applications the roles display all the lanes as expected. These lanes are not personalised as standard and as a result there are no background images assigned to the role.
I then start by adding a background image to the role for my user.
I choose an image for ESS and close the theme chooser. I log off the system and log back on to ensure my theme changes took effect without any adverse symptoms.
I choose the Toggle Settings button to personalise the landing page for my user. This is where the bizarreness starts. Even though I have lanes displayed for my user, none of them are selected on the lane selector tiles.
I delete all the lanes and re-add them replicating what an end user may do. The lanes then display as expected.
I log off, make myself a coffee and log back on again. The lanes just hang and none of the previously displaying information is shown anymore.
The only known way to get the lanes back is to reset the personalisation as seen above.
To investigate the issue, I logged into the backend and looked at the OData error logs and see a few errors containing the message "Resource Chip not found" and the application log has it's corresponding entry. Google Chrome developer tools also display an error to this effect with a bit more detail seemingly pointing to the personalisation which isn't found. Below is a copy of the Google Chrome message:
2014-09-26 12:41:58 [main.html] Error (404, Not Found) in OData response for GET "/sap/opu/odata/UI2/PAGE_BUILDER_PERS/Chips('X-SAP-UI2-PAGE%3AHREMPLOYEE%3A00O2TM3I4P3SJJNTS468SZQGY')?$expand=ChipBags/ChipProperties": HTTP request failed
Details: Resource Chip not found. - {"requestUri":"/sap/opu/odata/UI2/PAGE_BUILDER_PERS/Chips('X-SAP-UI2-PAGE%3AHREMPLOYEE%3A00O2TM3I4P3SJJNTS468SZQGY')?$expand=ChipBags/ChipProperties","statusCode":404,"statusText":"Not Found","headers":[],"body":"{\"error\":{\"code\":\"SY/530\",\"message\":{\"lang\":\"en\",\"value\":\"Resource Chip not found.\"},\"innererror\":{\"transactionid\":\"027245E4CB4BF1B993FE00163E000001\",\"timestamp\":\"20140926114110.6160000\",\"Error_Resolution\":{\"SAP_Transaction\":\"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details\",\"SAP_Note\":\"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)\"},\"errordetails\":[{\"code\":\"/IWBEP/CX_MGW_BUSI_EXCEPTION\",\"message\":\"Resource Chip not found.\",\"propertyref\":\"\",\"severity\":\"error\"}]}}}"} sap.ui2.srvc.ODataWrapper
It seems as if my personalisation isn't saved as the GET call on the OData service can't find any information. My user has all the required authorisations (SAP_ALL, SAP_NEW, X_REST) and , so I don't understand why the personalisation would not have been saved.
I have seen similar issues for Fiori posts (Resource Chip not found) stating that the OData service has to be deleted and recreated, but I cannot see that the design would require this to happen every time a landing page is personalised. I am fairly confident that we have missed something small and that there is someone out there who can provide some insight.
Our component level details are as follows:
| IW_FNDGC | 100 | 2 |
| SAP_BASIS | 740 | 8 |
| SAP_ABA | 740 | 8 |
| SAP_GWFND | 740 | 8 |
| SAP_UI | 740 | 9 |
| IW_PGW | 100 | 6 |
| SAP_HR | 608 | 5 |
| EA-HR | 608 | 5 |
Useful answers will be rewarded as always.
Thanks
Dear Experts,
We are facing an issue where there is an absence type LWP3 which is half day LOP. If I maintain 0.5days in 2001,it does not deduct half salary.When 1 day is entered in 2001,it deducts half-day salary.This is for international payroll.Please explain with clear steps as I am new to payroll.
Quick response will be appreciated.
Thanks in advance,
Mira.
Hi All,
i'm implementing a Web Form (by HRASR_DT SAP tool) of a leaving action ; if i try to make an insertion of a leaving event on IT PA0000 adding a "Create" Infotype operation and set a I0000-BEGDA value as Effective Date + 1 day, i receive the following error : Employee is no longer with the company since "Effective date" . So the system is trying to create a new event at ED and it's not modifying the begda date (at ED +1) of the main one.
Any help?
Thanks a lot
Giorgio
Hi experts
i need your help in a very important issue
i need to know how set default value for religion when hiring a new employee
EX: when using hiring action the religion field should be filled with a default value like "Religion 1" is this a feature or what ???
Appreciate your quick response
Thanks
Hello,
We are running offcycle workbench on 1Nov2014 with Reason (Regular PAyroll on demand ) for one employee who got terminated on 1Nov2014 in order to make F&f settlement to him. But system is throwing erro - The payroll run was not successful.
We have mainatined final payments in IT -0015 with same date 1N0v2014. but still it is throwing error. Screensgot attached.
Please reply asap.
Regards
Varun
Hi experts
I have a scenario wherein I want to prorate a Wage type according to the start and end dates in Infotype 0014. I have tried setting the Processing Class 10 to 1. When I do this, the system prorates according to the start date. Example:
If the start and the end dates for wagetype 4000 are: 24.05.2014 to 31.12.9999, amount is 1000 and the payroll period is May'2014, then amount calculated is 258.06, which is correct.
If however, the start and the end dates for wagetype 4000 are: 01.05.2014 to 24.05.2014, amount is 1000 and the payroll period is May'2014, the system generates the amount 1000, which is incorrect.
How can we handle this? Please help.
Regards
Divya Tiwari
Hi Experts,
I am facing the issue when i am trying to publish the content and getting the the message message: 'SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 401 : Unauthorized")....
I troubleshoot the problem and found user id provide in the RFC destination was not correct..than i provided my user id and password in the RFC connection. It starts working and able to publish the content without any issue.
Now i want to replace it with some generic id and As soon as I am providing some generic user id (Even by copying the user with my id "which is working fine with RFC connection") and password to same RFC connection, start getting the same exception.
Please provide your expert view on the same, so that i can resolve this issue.
Thanks..
Priyank
Hi,
We have created Contract Extension form using FPM for HR Renewal, but unable to connect to landing page.
Can you please suggest us how to integrate and make it visible in EEPHR_MANAGER_MSS_SR_UI5_1 & EEPHR_EMPLOYEE_ESS_XX_UI5_1 process chip?
Thank you.
Jay
Hi Experts,
I am trying to configure Reporting Lane in HR Renewal landing Page. I have done the required activity/activation as mentioned here. I have done the settings for following:
Data Source: 0HR_PA_4
ODP: 0HCM_PA_T01
Query: 0HCM_PA_T01_Q0008
Now when I try to execute the query, I get following dump. I have seen some SAP notes which are very similar to this (one such is 1323444 - a correction note). So want to know if there is any such correction for HCM queries also.
ABAP Call Stack:
| 39 METHOD CL_ABAP_STRUCTDESCR===========CP CL_ABAP_STRUCTDESCR===========CM00I 104 |
| CL_ABAP_STRUCTDESCR=>CHECK_COMPONENT_TAB |
| 38 METHOD CL_ABAP_STRUCTDESCR===========CP CL_ABAP_STRUCTDESCR===========CM00C 10 |
| CL_ABAP_STRUCTDESCR=>GET |
| 37 METHOD CL_RSR========================CP CL_RSR========================CM01D 6 |
| CL_RSR=>TYPE_FACTORY |
| 36 METHOD CL_RSRTS_MD_READ_ODP==========CP CL_RSRTS_MD_READ_ODP==========CM008 55 |
| CL_RSRTS_MD_READ_ODP=>_ADJUST_CMPOUND_ATR |
| 35 METHOD CL_RSRTS_MD_READ_ODP==========CP CL_RSRTS_MD_READ_ODP==========CM009 131 |
| CL_RSRTS_MD_READ_ODP=>_CREATE_ATRINFO |
| 34 METHOD CL_RSRTS_MD_READ_ODP==========CP CL_RSRTS_MD_READ_ODP==========CM001 48 |
| CL_RSRTS_MD_READ_ODP=>CONSTRUCTOR |
| 33 METHOD CL_RSRTS_MD_READ_ODP==========CP CL_RSRTS_MD_READ_ODP==========CM002 4 |
| CL_RSRTS_MD_READ_ODP=>IF_RSMD_RS_ACCESS~CREATE |
| 32 METHOD CL_RSMD_RS_FACTORY_ACCESS=====CP CL_RSMD_RS_FACTORY_ACCESS=====CM001 33 |
| CL_RSMD_RS_FACTORY_ACCESS=>GET_READER |
| 31 FORM SAPLRRSI LRRSIF08 62 |
| INITIALIZE |
| 30 FUNCTION SAPLRRSI LRRSIU02 43 |
| RRSI_VAL_SID_CONVERT |
| 29 FORM SAPLRRS2 LRRS2F02 637 |
| GET_SIDS |
| 28 FORM SAPLRRS2 LRRS2F02 859 |
| RANGE_GET_SID |
| 27 FORM SAPLRRS2 LRRS2F02 60 |
| VREP_FROM_VAR_VALUE |
| 26 FUNCTION SAPLRRS2 LRRS2U02 74 |
| RRS_VREP_FROM_VAR_FILL |
| 25 METHOD CL_RSR_OLAP_VAR===============CP CL_RSR_OLAP_VAR===============CM003 33 |
| CL_RSR_OLAP_VAR=>IF_RSR_VAR_RUNTIME~SUBMIT |
| 24 METHOD CL_RSR_VAR_RUNTIME============CP CL_RSR_VAR_RUNTIME============CM00Q 13 |
| CL_RSR_VAR_RUNTIME=>IF_RSR_VAR_RUNTIME~SUBMIT |
| 23 FUNCTION SAPLRSR_VARIABLES LRSR_VARIABLESU05 91 |
| RSR_VAR_SUBMIT |
| 22 METHOD CL_BS_ANLY_SELECTION==========CP CL_BS_ANLY_SELECTION==========CM004 179 |
| CL_BS_ANLY_SELECTION=>IF_BS_ANLY_SELECTION~CHECK |
Best Regards,
Bhaskar
Hi Experts,
Need your valuable inputs to fix this issue.
We have migrated on EHP7 in sept 2014, We are on SAP support pack level SAP_HR - SAPKE60475 and SAP_FIN -SAPK-61705INSAPFIN.
All notes are already applied for below mentioned error , notes : 1767946Error messgae 3G473 in account assignment block check, 1873723 - Error message 3G 473 in account assignment block check (II), 1165365, 1299083 or 625350.
Error : Checking the Funds Management account assignments revealed an error
error is coming while doing payroll posting of Sept 2014 on production.
Requesting you to help me to resolve this issue. i coudn't find any clue for this. not using Public Sector Management.
Thanks in advance
Nirali P
Hello gurus,
I am part of team implementing what seems to be the first implementation of HR Renewal in Spain.... awesome... very cool) Today I have an issue with OM-PA integration.... and hope you guys can throw a lil light here....
Creating position thru PPOME or PP01 in R/3 works fine both OM and PA are updated because my client use integration since ever.
In NWBC; we are using P&F Z_SHRPAO_CREATE_POSITION (a light copy of standard SHRPAO_CREATE_POSITION) to create position which works fine on the OM side but PA T528B doesn't get updated.
Therefore when running an PA action and trying to assign this position to an employee, standard error message popup indicating that the position does not exist.
I have tried to activate PAPD switch in T77S0
I have checked a few notes; just requested their application (if it is posible) to my basic team.
1996229 - Integration PD to PA: Incorrect cost center in infotype 0001
1862798 - PD-PA Integration: Correction for infotypes 1000 and 1001
And this one, although my system is 6.07:
1610719 - PD->PA integration in new infotype framework
So my problem is:
Same scenario in R3 environment works perfectly fine.
Method EXECUTE_INTEGRATION of class CL_PD_TO_PA_INTEGRATION thru interface IF_EX_HRBAS_PD_PA_INTEGRATION is called after saving when creating position but never reaches past break-point:
Could you find the same behavior in your system? Did you solved it?
Thank you!!!! We'll be waiting for your valuable help!
Cheers.
Antoine
HI, Can anyone help me out by giving indetail information of Dubai Payroll in SAP HCM?
Dear Experts,
We are facing an issue where there is an absence type LWP3 which is half day LOP. If I maintain 0.5days in 2001,it does not deduct half salary.When 1 day is entered in 2001,it deducts half-day salary.This is for international payroll.Please explain with clear steps as I am new to payroll.
Quick response will be appreciated.
Thanks in advance,
Mira.
Just a quick question, There was a Change Request regarding the Phone Number in the Emergency Contacts in MSS.
-The standard on this one is the Phone Number in Emergency Contacts is NOT shown in the overview screen in MSS. You still to need click (edit) the phone number in order to appear. My question is HOW to make it appear in overview side of MSS so that the customer doesn't need to click in order to see the phone number in emergency contacts.
I already got the field in MSS through SE80 how to display it is my next step. (I think)
Hi
I'm currently working on HCM Process and Forms using FPM forms. I got a scenario where i have to update an infotype containing dynamic action(Creation of one infotype updates some other infotypes).
Is there any possibility to achieve this in FPM Process and Forms ?
Thanks in advance.
Regards
Priyanka
Hi Experts,
I am using Suite Page Builder to create some custom catalogs for HR Renewal. I have followed the instructions for transporting the custom catalogs (http://help.sap.com/saphelp_uiaddon10/helpdata/en/c9/6a66e933ed4ab989b5e587c54e3ae2/content.htm?frameset=/en/db/55bc2390a449349e18e84ea8cf0d97/frameset.htm¤t_toc=/en/e4/843b8c3d05411c83f58033bac7f072/plain.htm&node_id=928 ) . I have added the following parameters to my user:
When I create a new custom catalog I do not see it included in any of the above requests.
Could you please assist on this?
Any help will be much appreciated.
Thank you & Kind Regards,
Michael
Good afternoon - We are planning to update to EhP7 (currently on EhP6). This will mostly be a technical update, but we would like to be positioned to activate HR Renewal components at a later date. If we include the HR Renewal add-on into the EhP7 update, will the classic HR functions continue to look and feel as they do today, with any HR Renewal changes needing to be activated in the Switch Framework?
Thanks for your help!
Regards,
Blair Towe
Hi All,
I have a requirement to capture the comments entered in HCM Processes ad Forms by approver and send comments to other user over email by workflow.
Can someone let me know the approach to read the comments in workflow?
I could see that task TS17900110 is used to read the values of form into workflow but this will not read the comments.
Appreciate your response.
Thanks,
Somu
I have created a program populating info type 0000, 0001, 0007 and 0016. When updating 0001 manually or in dialogue mod, the vacancy get populated. I have been using HR_INFOTYPE_OPERATION .
I need to update info type HRP1007 . I've tried using RH_UPDATE_INFTY and RH_INSERT_INFTY , but it doesn't seem to connect to OM. tcode PPOME when I look at the position.
wa_p1007-plvar = '01'.
wa_p1007-otype = 'S'.
wa_p1007-infty = '1007'.
wa_p1007-begda = p_begda.
wa_p1007-endda = '99991231'.
wa_p1007-mandt = sy-mandt.
wa_p1007-istat = '1'.
APPEND wa_p1007 TO it_p1007 .
CALL FUNCTION 'RH_UPDATE_INFTY'
EXPORTING
vtask = 'D'
TABLES
innnn = it_p1007
EXCEPTIONS
error_during_update = 1
no_authorization = 2
repid_form_initial = 3
corr_exit = 4
OTHERS = 5.
Anyone have any suggestions. It is certainly one of these things that I have to update behind the scenes, since I'm updating numerous records (one at a time.
Any info would be appreciated.